LeCroy WAVERUNNER 6000 SERIES, Service Manual

Page: 17 / 325

Specifications
3-1
3. Specifications
3.1 Vertical System
WaveRunner WaveRunner WaveRunner WaveRunner WaveRunner
6030(A) 6050(A) 6051(A) 6100(A) 6200(A)
Nominal Analog Bandwidth @
50
Ω (-3 dB)
350 MHz 500 MHz 500 MHz 1 GHz 2 GHz
Rise Time (Typical) 1 ns 750 ps 750 ps 400 ps 225 ps
Input Channels 4 4 2 4 4
Bandwidth Limiters 20 MHz; 200 MHz
Input Impedance 1M Ω //<20pF (10 M Ω // 9.5pF using PP007 probe)
Input Coupling 50 Ω : DC, 1M Ω : AC, DC, GND
Maximum Input Voltage, 50 Ω 50 Ω : 5 Vrms, 1 M Ω : 250 V max (Peak AC: ≤ 10 kHz + DC)
Channel to Channel Isolation >40dB @ <100MHz (>30dB @ full bandwidth)
Vertical Resolution 8 bits; up to 11 with enhanced resolution (ERES)
Sensitivity 50 Ω : 2 mV/div - 1 V/div fully variable; 1 M Ω : 2 mV - 10 V/div fully variable
DC Gain Accuracy ±1.0% of full scale (typical); ±1.5% of full scale ≥ 10mV/div (warranted)
Offset Range 50 Ω : ± 400 mV @ 2-4.99 mV/div
± 1 V @ 5-100 mV/div
± 10 V @ 102 mV/div - 1V/div
1 M Ω : ± 500 mV @ 2-4.99 mV/div
± 1 V @ 5-100 mV/div
± 10 V @ 102 mV/div - 1V/div
± 100 V @ 1.02V/div - 10V/div
Offset Accuracy
±(1.5% + 0.5% of offset value + 1 mV) all fixed gain < 2V/div
±(1.5% + 1.0% of offset value + 1 mV) all variable and V/div settings ≥ 2V/div
Probing System BNC or Probus®
3.2 Horizontal System
Timebases
Internal timebase common to all input channels; an external clock may be
applied at the auxiliary input
Time/Division Range 20 ps/div - 10 s/div
Math & Zoom Traces 4 independent zoom and 4 math/zoom traces standard
Clock Accuracy ≤ 5 ppm @ 25° C ( ≤ 10ppm @ 5-40° C)
Time Interval Accuracy Clock Ac Jitter Noise Floor
Sample Rate & Delay Time Accuracy Equal to Clock Accuracy
Trigger & Interpolator Jitter (RMS) ≤ 3 ps rms (typical)
Channel to Channel Deskew Range ±9 x T/div setting, 100ms max, each channel
External Sample Clock
DC to 1 GHz; 50 Ω (limited BW in 1M Ω ), BNC input, limited to 2 Ch
operation (1 Ch in WR6051), (minimum rise time and amplitude
requirements apply at low frequencies)
Roll Mode User selectable, Available at lower time/div settings