Getting Started Manual
WA-GSM-E RevB
32
5.
Back USB
- Indicates whether the Back USB option is set to
Computer
or
Printer
.
Back USB
option set to
Computer
(as shown previous).
Back USB
option set to
Printer
6.
Horizontal Trigger Position Marker
- Shows the horizontal trigger
position.
7.
Display Markers
(Zero Volts Level) - Show the ground reference
points of the displayed waveforms. If there is no marker, the
channel is not displayed.
8.
Display Signal Source
9.
Signal Coupling symbol
10.
Volts/Division
11.
Indicates whether the
bandwidth limiting filter
is
On
or
Off
. The
B
icon indicates the filter is
On
.
12.
Main
timebase setting
(a Window timebase setting is also displayed
when applicable).
13.
Trigger Source
14.
Frequency Counter
of Trigger Signal
15.
Trigger type
and level indicator
16.
Horizontal Trigger Position Readout
- Displays the waveform's
horizontal position in time (seconds).
Auto Setup
The WaveAce Series Digital Storage Oscilloscopes has an Auto Setup
function that identifies the waveform type and automatically adjusts
controls to produce a usable display of the input signal.
Four Auto Setup waveform options are available:
Multi-Cycle
,
Single-Cycle
,
Rising Edge
, and
Falling Edge
.
