LeCroy USB Mobile HS, User Manual

Page: 13 / 154

USB MobileHS User Manual Chapter 1: Overview
LeCroy Corporation
5
1.4 Features
General
• Fully compliant with USB 2.0 specification
• Supports Link Power Management Extension to USB 2.0 specification.
• Supports Full-Speed, Low-Speed, and Hi-Speed USB
• User friendly "CATC Trace™" Interface that displays bus traffic using color and
graphics
• Trace Viewer available as free non-recording, view-only software
• 13 Month warranty and hot-line customer support
Physical Components
• PC-Card form factor: Personal analyzer. Low-power, portable operation with any
notebook PC.
• Two Mini AB USB ports and cables: Designed to reduce bulk and maintain portabil-
ity and compact size.
• 64MB of physical recording memory
Recording Options
• Versatile triggering - bit-wise value and mask data patterns up to sixteen bytes wide
for Setup transactions and data packets.
• Triggering on new High-speed PIDs and split transaction special tokens (ERR,
SPLIT, PING, NYET, DATA2, and MDATA).
• CATC Trace displays and enumerates High-speed Micro Frames.
• Three forms of triggering: Snapshot, Manual and Event.
• Transaction sequencer allows triggering on a token qualified by a data pattern and
/or specific handshake or alternately transactions can be filtered (i.e., NAK’d trans-
actions).
• Advanced triggering with event counting and sequencing.
• Triggering on multiple error conditions - PID bad, bit stuffing bad, CRC bad,
end-of-packet bad, babble, loss of activity, frame length violation, time-out or
turn-around violation, data toggle violation, Token, Bus Conditions, Data Length,
excessive empty frames.
• Real-time traffic capture filtering and data packet truncation variable up to 256
bytes.
• Adjustable buffer size from 0.4 MB to 64 MB.