Page 7
Hammer
Make connection of the loop cord
between the knife and the handle
outside screw at black mark.
Pass hole of black mark around the
screw.
The cord will probably have to be adjust
later.
If this cord is too tight, the action of the
handle will be too hard.
If the cord is too loose, the knife will not
go completely down producting
weaving mistakes.
Connect shaft frame loop cords to each
hammer at the black mark. Just pass
hole of black mark around each screw of
the hammer.
Make sure to pass loop cord outside the
gold plated rod as in the picture.
Knife
Knife hook
Screw
Hammer screw
Gold plated rod
Magnet
