24
To install the heddles you can just bend the heddle supports .
To remove the shaft frames you first have to unscrew the top nut of the jack pin. It is important to leave the
bottom nut as it is.
Then pull up the shaft frame from the castle.
We strongly recommend that you have those nuts installed at all times.
Top Nut
Bottom Nut
Jack Pin
Fig. 21
TO INSTALL HEDDLES:
Disconnect the center of both heddle supports
of a shaft frame and take it out of the end
frame by bending it.
For more information, see the book supplied
with the loom “Warp & Weave”.
Fig. 22
