22
Install treadle cords with the washers
under the treadles as shown here
NOTE: This loom works better when all the
treadles are connected to lams with tie-up cords.
Tie-up cords prevent the lams from jamming as
the shafts go down.
Lam
Washer
and knot
Treadle cord with
washer
Following each tie-up, close the gate at the
end of each treadle.
Note that if the gate on a treadle is hard to
open/close, it may be necessary to slide
the Texsolv Treadle Spring Cord a few
inches along the treadle closer to the front
of the loom to make opening/closing the
gate easier.
Once the gate is closed the Treadle Spring
Cord can be re-positioned back closer to
the gate.
