9
Place the take-up motion handle E, with a
9/16” steel
washer, on the right-hand side end of cloth
beam F.
Note: The ratchet gear is on the right-hand
side beam end.
The ratchet pawl affixed to the take-up mo-
tion handle must be lifted up.
Insert the end of cloth beam F into the holes
in upper front cross-members G and G` The
hole in lower middle cross-member B must
be right beside the hole at the bottom of
right-hand side A`
Using a 2” (50 mm) round-headed screw
no. 14, affix right-hand side A` to lower
middle cross-member B.
Using two 2” (50 mm) round-headed screws
no. 14, affix one of the two breast beams to
the top of the front posts B and B`
The rounded edge must be towards the out-
side of the loom.
