20
Threading Hook
FIRST TREADLE TIE-UP
Select any treadle and tie the Lams to the Treadles using
the 7½” cords supplied with the loom. Use the threading
hook to help pass the cord through each hole of the lam.
Install the Treadle Rocker Loop Cord on the
Jack box screw at the black mark as a starting
point.
TREADLE HOOK AND ROCKER LOOP CORD
Slide the Treadle Hook through the Screw
Eyes and the treadle Cord Loops. Before the last
Screw Eye, insert the Hook through the
Treadle Spring loop cord and secure with the peg
in the front.
In the Treadle rest position(up) there should be no
or very little tension on the Spring.
However, slack on the spring cords is not
desirable.
When all treadles are tied up, they should
be at almost the same height. The top front part of
each treadle should be app. at 8¾" to the floor.
Jack box screw
Rocker loop cord
Loop cord of the Treadle spring
Fig. 24
