Leckey Squiggles Early User Instructions Download Page 31

12 Daily Product 

Inspection

(Therapists, parents & carers)

We recommend that daily visual checks of the 

equipment are carried out by therapists, carers 

or parents to ensure the product is safe for 

use. The recommended daily checks

are detailed below.

1. Ensure all adjustment knobs and bolts are in 

place and secure.

2. Check all upholstery and Velcro® for signs 

of wear and tear.

3. Ensure the pelvic harness is fully secured 

around the user and they cannot slide or creep 

forward in the seat.

If in any doubt to the continued safe use of 

your Leckey product or if any parts should fail, 

please cease using the product and contact 

our customer service department or your local 

dealer as soon as possible.         

13 Annual Product 

Inspection

(Therapist, Technician, Leckey Product

Advisor, Dealer)

Leckey recommend that each product should 

be subject to a detailed inspection at least 

once a year and every time the product is 

reissued for use. This inspection should be 

carried out by a technically competent person 

who has been trained in the use of the product 

and should include the following checks as a 

minimum requirement.

1. Check all knobs, nuts, bolts and plastic 

buckles are in place, replacing any missing 

items. Paying particular attention to the

following items; 

  -  Trunk Support height and angle 

    adjustments bolts.

  -  Pelvic harness attachment points.

  -  Chair attachment straps.

2. Check that there is no visible wear or tear 

on the metal or plastic components.

3. Visually check the structure of the product 

paying attention to weld points on the frame 

ensuring there are no signs of fatigue or 

cracking around the welds.

4. Leckey recommend that a written record is 

maintained of all annual product inspections.

If in any doubt to the continued safe use of 

your Leckey product or if any parts should fail, 

please cease using the product and contact 

our customer service department or your local 

dealer as soon as possible.

Summary of Contents for Squiggles Early





































Reviews: