Leckey Squiggles Early, User Instructions

Page: 16 / 36

To attach the cushion first remove the
dynamic trunk assembly from the seat base
and lay it down flat. Open the side fasteners
and hooky panels of the trunk support. Insert
one end of the assembly into the pocket in
the cushion. Then sleeve the other end of the
inner into the opposite end of the cushion.
Once in position snap the fasteners together
around the plastic rods and the one fastener
in the middle of the support plate. Finally
secure the Velcro tabs at the back. You can
then reattach the trunk support as detailed in
Section 7.
8.3 Dynamic trunk
support cushion
attachment