Mygo Seat - Size 3 Stander User Manual
p19
To fit the dynamic backrest, insert
the strut into the bottom bracket
as shown. Use the provided screw
, nut , saddle washers and
standard washers to secure in
place. Please ensure that the screw
thread protrudes through the nut .
E
F
Now raise the dynamic strut and
insert into the top bracket as shown.
Using the provided screw , nut
and washers , secure the new
dynamic backrest in place as shown.
Ensure that the bolt goes through the
centre of the assembly as shown
F
.
Finally fit the domed cap
E
.
Use caution when
assembling and fitting the
dynamic backrest as there
is a minor risk of finger
nipping.
9.16 ATTACHING THE
OBLIQUITY PADS
To attach the obliquity pads first
remove the base cushion. Set the
obliquity pad panel in place with
the holes on the tab over the snap
fastener. Insert foam as required and
refit the base cushion.
