p20 Leckey BeMe User Manual
1
2
Always keep the tilt-in-space lever in the
locked position to prevent accidental
actuation of the lever which could cause the
seat unit to jolt and possibly cause injury to
the child.
Please use the handle bars when operating
tilt-in-space.
Always check with your therapist that the use
of tilt-in-space will not cause any obstructions
to the child’s airways.
Warning:
Only use the tilt-in-
space feature on level ground.
If the tilt-in-space is used with
high seat positions, then there
is a risk of the seating system
becoming unstable when
parked on a sloping surface.
The tilt-in-space can be angled
while the user is in the seat.
Before you adjust the tilt-in-
space angle of the seat, always
ensure the pelvic belt is secured
preventing the user from sliding
forward in the seat.
SECTION 9.10:
TILT-IN-SPACE –
MEDIUM HIGH-LOW
CHASSIS
To adjust the tilt angle, press the lever under
the seat base. Once you have selected the
angle you require, simply remove your hand
from the lever and the chair will be locked in
position. The tilt-in-space should be locked off
while the user is in the seat.
To lock the lever, twist the pull pin to the right-
hand side of the lever and the pin will pop
into position
2
. You may have to lift the lever
slightly to allow it to lock. To unlock pull the
pin out and rotate 90 degrees, the lever can
then be operated
1
.
You must ensure you are
holding the push handle with
one hand while operating
the tilt- in-space, to prevent
the user from jerking forward.
Warning:
