Leckey BeMe User Manual Download

Page: 113 / 128

Leckey BeMe User Manual

p113

SECTION 18.26:

ADJUSTING FLEXIBLE

WRAPAROUND

HUGGING LATERALS

SECTION 18.27:

ADJUSTING ARMREST

HEIGHT

The hardware for the flexible laterals is

adjusted in the same way as the Laterals. To

adjust the tension in the flexible lateral, adjust

the length of the webbing on the front lateral

strap .

The armrest can be adjusted into several

incremental height positions. To adjust the

armrest height, loosen the bolt , which rests

off-centre from the midline of the plate. With

the end of the tool still in the bolt head, slide

the bolt across to the other side of midline,

, which will allow height adjustment of the

armrest up and down. To secure, slide the bolt

head back to the original off-centre position,

, into one of the several incremental height

positions, and tighten the bolt to secure in

place.

Summary of Contents for BeMe

































































































































Search results

Summary of Contents for BeMe

Reviews:

Related manuals for BeMe

Brands by name

Popular brands

Leckey BeMe, User Manual

Search results

Summary of Contents for BeMe

Reviews:

Related manuals for BeMe

Brands by name

Popular brands