Lebensstil Kollektion LKGH-8602MB, Instruction Manual

Page: 18 / 20

15
Gas Connection to Flexible Steel Pipe
The gas feed connector to the appliance is a threaded, male 1/2” connector for
round gas pipe. Only use pipes, tubes and gaskets that comply with current
safety codes. The maximum length of the flexible pipes must not exceed
200cm. Once the connection have been made, ensure that the flexible metal
tube does not touch any moving parts and not crushed.
Check the Seal
Once the appliance have been installed, make sure all the connections are
properly sealed,check using a soapy water solution. Never use igin.
How to load the battery
Open the battery box, and then place a 1.5V size “D” battery into the box.( take
note of the polarity)
Note:
a)"prior to installation, ensure that the local distribution conditions (nature of the
gas and gas pressure) and the adjustment of the appliance are compatible";
b)"the adjustment conditions for this appliance are stated on the label (or data
plate)";
c)"this appliance is not connected to a combustion product evacuation device.
It shall be installed and connected in accordance with current installation
regulations. Particular attention shall be given to the relevant requirements
regarding ventilation".
CAUTION:in case of cooktop glass breakage:shut immediately of all
burners and any electrical heating element and isolate the appliance from
the gas supply do not touch the appliance surface,do not use the
appliance.