Lebensstil Kollektion LKGH-8602MB, Instruction Manual

Page: 17 / 20

14
The cylinder tap have to be readily accessible.
Over flow of liquid from pans of the hotplate shall not fall onto cylinder or its
accessories.
The flexible tube shall not be in contact with sharp edges.No internal
connection shall exist between the cylinder compartment and the different parts
of the appliance where burners are placed.
The ventilation openings of the compartment cannot be obstructed when the
appliance is placed in position.
Gas Connection for Cooktop
The cooktop should be connected to the gas supply by an authorized
installer.During installation of this product it is essential to fit an approved gas
regulator to isolate the supply from the appliance to the gas mains or liquid gas
tanks must be carried out according to the safety standards currently in
force,and only after it is ascertained that it is suitable for the type of gas to be
used.If not,follow the instructions indicated in the section entitled.If the cooktop
is to be connected to tanks containing liquid gas, use pressure regulators that
comply with current safety standard.
Gas connection to Non-flexible Pipe
(Copper or Steel)
Connection to the gas source must be done in such a way as to not create any
stress points at any part of the appliance.
The appliance is fitted with an adjustable, “L” shaped connector and a gasket
for the attachment to the gas supply. If leakage is found after the connector
assembled, please replace the gasket (supplied with appliance).
The gas feed connector to the appliance is a threaded, male 1/2” connector for
round gas pipe.