Lebensstil Kollektion LKGH-8602MB, Instruction Manual

Page: 16 / 20

13
The hob can also be installed above built-in provided with cooling
ventilation.
In the event the cooktop is installed above a built-in oven,a wood panel must be
inserted as insulation.This panel must be placed at about 50 mm from the
bottom of the cooktop itself.
Important:When installing the cooktop above a built-in oven,the oven should be
placed on two wooden strips:in the case of a joining cabinet surface,remember
to leave a space of at least 45
×
560 mm at the back.
Installation of Built-In Cooktops on a CYLINDER COMPARTMENT
In the event the cooktop is installed above cyylinder compartment,a wood
panel must be inserted as insulation.This panel must be placed at about 50mm
from the bottom of the cooktop itself.
The opening of this compartment have to permit the easy introduction and
removal of the cylinder.The dimension of the opening and the inside of the
compartment shall be at least large enough to accommodate the cylinders
(with regulator fitted) which are the most commonly used in the country.The
total area of the openings of the base shall be at least 1/50 of the floor area of
the compartment.The cylinder support:]
Shall have sufficient mechanical strength.
Shall not let the cylinder rest directly in the ground.
Shall not sill higher than the base on which the cylinder rests.