SU-56 Operation Manual
CH6 Simple Software Operation Steps
The following are the basic steps for using the software, but not all
components have the same process, so they are for reference only.
Create a project:
1. Start the Universal IC Writer II software and connect to the
machine.
2. Select the component number to be programmed.
3. Obtain the data source (read master tape or load burn file).
4. Go to the Option → Device Option page to adjust the parameters
(not necessary).
5. Set the Precedure (burning action, process).
6. Go to the Project page of Select/Project to save the project file.
Mass production:
1. Open the SU-56 software (Universal IC Writer II needs to be
closed).
2. Put away the Driver/Socket module board to be burned.
3. Go to the Project page
(1) Click Add to add the project file (if it has already
been added, it can be skipped).
(2) Click the project, and then press Load to specify the
project file to be burned.
4. Place the IC and press the START button to start programming.
(1) Press the software or the actual key to start.
(2) The Auto Run function must be selected before
starting.
－
22̶̶
－
