SU-56 Operation Manual
different detection methods and processes. The delay time from the
end of detection to the next time is set here.
5.6.10 DateTime Setting
5.6.10.1 The software can connect up to 4 SU-56 programmers at
the same time, but you need to set the order of the machines on the
screen on this page. Each machine will have its own code number
when it leaves the factory. If you use multiple units at the same
time, you need to adjust to the same group number. The last 1 yard
serves as the order of the machine.
5.6.10.2 Specifies the machine to be the source of the codename.
5.6.10.3 Enumarate, when pressed, will list the machines currently
connected to the computer (and show it in the upper column).
5.6.10.4 The Writer Machine field specifies the machine to be
written to at present. If a Socket module board is installed, the first
LED of the Pass will light up.
5.6.10.5 Group is used to specify the number of the currently
selected machine to be used as the first machine, and it will be
written after pressing Writer.
5.6.10.6Auto Define will automatically handle the above actions
and reassign the order of the machines.
－
21̶̶
－
5.6.10.4
5.6.10.5
5.6.10.3
5.6.10.2
5.6.10.6
