12
· The use of spare parts not supplied by LEANTACHNIK AG is not permitted since we have not
inspected these parts and they may therefore have a negative influence on the reliability of the
product.
· The use of spare parts not supplied by LEANTECHNIK AG invalidates the component warranty
since we do not accept any liability for such spare parts.
· Lubricant oils, detergents, preservatives and acids must be collected and disposed of in accord-
ance with the applicable legislation.
· Keep clothing, hands and other parts of the body away from moving parts, e.g. rollers, drums,
belts, levers etc.! You should preferably wear closely fitting clothes and tie long hair back.
· Before moving or transporting anything, make sure that there is no-one in the risk area.
· Before any maintenance work, the power supply must be disconnected and the mechanical
locking devices provided for this purpose must be activated!
· Observe the safety notes and signs on the component.
· Take all possible preventive measures to avoid injury or damage of any type. Make sure that
the component can be operated and repaired safely under all circumstances.
Potential sources of danger at the component are all identified in the hazard examination
and risk analysis.
=> see section 1.6 Risk assessment
Danger!
Never bypass any safety mechanisms!
Never deactivate any safety mechanisms!
All specialist personnel who operate and maintain the drive must read the operating and
maintenance manual.
· The manual must be available to operators at all times.
· The operators must read and understand the manual.
!
In the event of any doubt or uncertainty, it is essential to contact the manufacturer of the
component!
The operating and maintenance manual must be kept in good condition. Damaged, lost or
illegible pages must be replaced immediately.
The safety regulations set out in the following documents must be strictly adhered to:
· Operating and maintenance manual
· Legally applicable accident prevention regulations
· The company’s internal safety, operating and working instructions
4 Safety instructions
