BATTERIES
Where do I start?
4
The Picture Viewer uses two AA batteries. We
recommend purchasing good quality recharge-
able batteries, rated at 2000 mAh or better, plus
a recharger. To install batteries, open the battery
compartment door on the bottom. Put in two fresh
AA batteries following the diagram inside the com-
partment. We recommend purchasing a DC power
supply with an output of 4.5-6V 800-1800 mA.
Warning: Make sure your DC power supply has
a “positive” pin connection; otherwise
the Picture Viewer may be damaged.
When connecting or disconnecting an external
DC power supply, always turn the Picture
Viewer OFF
. Set the Main Power switch to
PW-
ON
to use the Picture Viewer; the Power light will
be ON. Set to
Charge
to recharge batteries; the
Charge light will be on. The Picture Viewer will not
display images while charging. Alkaline batteries
will work fine, but...
WARNING: Do not attempt to recharge alkaline
batteries.
If you use the Picture Viewer frequently,
it’s a good idea to have extra alkaline or
freshly recharged batteries handy.
TIP
