WinFast 6300MAX/MA Pro User’s Manual
15
transaction cycles, you can enable this item to provide compliance with PCI Ver. 2.1.
Memory Parity Check [Enabled]
Select Enabled if the DRAM chips in your system support parity.
4.5 Integrated
Peripherals
This Menu Setup allows you to configure your IDE, USB keyboard, Floppy Drive, Parallel
Port, Serial Port, and IR function.
CMOS Setup Utility – Copyright (C) 1984-2000 Award Software
Integrated Peripherals
Item help
Internal PCI/IDE
Both
IDE Primary Master PIO
Auto
IDE Primary Slave PIO
Auto
IDE Secondary Master PIO
Auto
IDE Secondary Slave PIO
Auto
Primary Master UltraDMA
Auto
Primary Slave UltraDMA
Auto
Secondary MasterUltraDMA
Auto
Secondary Slave UltraDMA
Auto
IDE Burst Mode
Enabled
SIS-7018 AC97 AUDIO
Enabled
SIS-7013 S/W Modem
Enabled
SIS-900 10/100M ETHERNET
Enabled
SIS-900 MAC Address Input Press Enter
USB Controller
Enabled
USB Keyboard Support
Disabled
IDE HDD Block Mode
Enabled
Onboard FDC Controller
Enabled
Onboard Serial Port 1
3F8/IRQ4
Onboard Serial Port 2
2F8/IRQ3
UART Mode Select
Normal
UR2 Duplex Mode
Half
Onboard Parallel Port
378/IRQ7
Parallel Port Mode
SPP
ECP Mode Use DMA
3
Game Port Address
201
Midi Port Address
330
Midi Port IRQ
10
Init Display First
PCI Slot
System Share Memory Size
16 MB
Extend Graphics Memory
Menu Level
!
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F1:General Help F5:Previous Values F6:Basic Defaults F7:Best Defaults
Internal PCI/IDE [Both]
The chipset contains a PCI IDE interface that supports two IDE channels: Primary (IRQ 14)
and Secondary (IRQ 15). Each channel supports two IDE devices, so the system is capable
of supporting a total of four IDE devices.
IDE Primary/Secondary Master/Slave PIO [Auto]
The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of
the four IDE devices that the onboard IDE interface supports. Modes 0 through 4 provide
successively increased performance. In Auto mode, the system automatically determines the
best mode for each device.