Leadtek MetaEye IVP256, User Manual, Page: 31 / 37

Advanced Operation 27
5.5 Connecting External Cameras
To compose different objects, the MetaEye IVP256 provides two A/V inputs on
its rear panel for two external camera connections. With these two external
camera inputs, you can switch the camera from built-in camera to Camera 1 or
Camera 2.
Step 1: Connect one set of A/V IN jacks on the rear panel of the MetaEye
IVP256 to the A/V OUT jack of your camcorder or CCD camera with
the supplied RCA cable. Note that you have to place your camcorder
or CCD camera in a location with sufficient light, and follow the
instructions of your camcorder’s or CCD camera’s manual to set up
and control your camcorder or CCD camera.
Step 2: If you need to connect a second camcorder or CCD camera, please
follow the same procedures in step 1 to connect the second camera.
Step 3: Go back to the A/V setup of OSD to switch the input source to
2-Video-1 (Camera 1) or 3-Video-2 (Camera 2).
You can also press the hot key “Camera” to switch the camera source.