Leadtek MetaEye IVP256, User Manual, Page: 25 / 37

OSD Introduction 21
Step 3: By selecting 2-Size , you can change the size of the PIP among
1-Small
,
2-Medium
,
3-Large
.
Step 4: Press the button to leave this menu.
You can also press the hot key “PIP” to switch the picture position.
•
3-Local
This item allows you to set the LCD screen to be displayed with your image
only.
Step 1: Press
or
to move to 3-Local menu, then press to enter.
Step 2: Press the button to leave this menu.
You can also press the hot key “View” to switch the remote and local
view.
4.2.2 A/V Setup
This menu allows you to select the content of the primary image to be displayed
with the local or remote site. There are four items of A/V setup:
1-Camera
,
2-Mirroring
,
3-Video
•
1-Camera
This item allows you to choose the source of video camera among “Front”,
“Video-1”, and “Video-2”.
NOTE: The image on the LCD screen will turn into a blue scene if the source of
Video-1 or Video-2 is not connected with any camera.
Step 1: Press
or
to move to
1-Camera
menu, then press to enter.
Step 2: Press
or
to select among
1-Front
,
2-Video-1
,
3-Video-2
,
depending on your actual configuration.