Leadtek MetaEye IVP256, User Manual, Page: 16 / 37

12 MetaEye IVP256 User’s Manual
If not, check the connection between MetaEye IVP256 and the ISDN jack, or
please refer to the following instruction of ISDN Setup.
Before proceeding the ISDN Setup, you have to turn on the “Switching Type”
switch first. Pick up the handset, and then press the [M] button. A menu bar of
four setup commands will be popped up at the bottom of the LCD panel as:
1-Auto Answer 2-Phone Book 3-A/V Setup 4-ISDN Setup
Move the cursor to item 4 to set up the ISDN in which there are three ISDN
setup menus:
1-Call Type 2-Switch Type 3-Voice Type .
The call types you connected to are
1. 1x56K
2. 2x56K
3. 1x64K
4. 2x64K
The default setting of ISDN Setup is 2x64K, which uses 2B channels and gives
you the best video quality. But in some regions, the ISDN service provider only
provides 56K as 1B channel. If you are not sure about the call type, please
contact your ISDN service provider.
The ISDN switch types you connected to are:
1. DSS1: Generally used in European, Taiwan, and China
2. NI1: Generally used in North American area
3. 5ESS: Generally used in USA, AT&T switch
4. DMS 100: Generally used in North American area
5. NTT: Generally used in Japan
If your ISDN switch type is DSS1/NTT, you have to enter the Local Number,
which is designated by the ISDN service provider with the default value of
Empty. Use the “0” ~ “9” keys to input the number.
If your ISDN switch type is NI1/5ESS/DMS100, you have to set SPID and Local
(ISDN phone) number: 1. SPID: The maximum SPID digital number is 20.
ISDN service provider assigns the SPID number. 2. Local: The maximum Local
digital phone number is 20. ISDN service provider assigns the Local Number.
The voice types you connected are:
1. A-Law: general used in the European area and China.
2 µ-Law: general used in the North American area, Taiwan and Japan.
After finished all the settings, please hang up the handset to store them.