High Voltage Digital Stepper Drive DM2282 Manual
Page 2 of 7
DM2282
2-phase Digital Stepper Drive
150-230VAC, 0.5-8.2A peak, Auto-configuration, Low Noise
Anti-Resonance provides optimal torque and nulls mid-range instability
Motor auto-identification and parameter auto-configuration technology, offers optimal
responses with different motors
Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus
offers smoother motor movement
Microstep resolutions programmable, from full-step to 51,200. It can also be set via DIP
switches.
Soft-start with no “jump” when powered on
Supply voltage up to 230 VAC
Output current programmable, from 0.5A to 8.2A. It can also be set via DIP switches.
Pulse input frequency up to 200 KHz
5V optically isolated input
Automatic idle-current reduction (Reduction rate can be software configured)
Suitable for 2-phase and 4-phase motors
Support PUL/DIR and CW/CCW modes
Over-voltage, over-current, phase-error protections
Descriptions
The DM2282 is a high voltage, fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion
control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its
motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared
with traditional analog drives, DM2282 can drive a stepper motor at much lower noise, lower heating, and smoother movement. Its
unique features make DM2282 an ideal choice for high requirement applications.
Applications
Suitable for a wide range of stepper motors, from NEMA size 34 to 51. It can be used in various applications such as laser cutters, laser
markers, high precision X-Y tables, labeling machines, CNC router, etc. Its unique features make the DM2282 an ideal choice for
applications that require both low-speed smoothness and high speed performances
