background image

                     

M542 Economical Microstepping Driver Manual V1.0

 

Tel: +086 0755-26434369                                  13                                Web Site: 

www.leadshine.com

 

APPENDIX 

Twelve Month Limited Warranty                                               

Leadshine  Technology  Co.,  Ltd.  warrants  its  products  against  defects  in  materials  and 
workmanship for a period of 12 months from shipment

 

out of factory. During the warranty period, 

Leadshine will either, at its option, repair or replace products which proved to be defective. 

Exclusions                                                                                                                           

The above warranty does not extend to any product damaged by reasons of improper or inadequate 
handlings  by  customer,  improper  or  inadequate  customer  wirings,  unauthorized  modification  or 
misuse,  or  operation  beyond  the electrical  specifications  of  the  product  and/or  operation  beyond 
environmental specifications for the product. 

Obtaining Warranty Service                                                                                     

To  obtain  warranty  service,  a  returned  material  authorization  number  (RMA)  must  be  obtained 
from  customer  service  at  e-mail: 

[email protected]

  before  returning  product  for  service. 

Customer shall prepay shipping charges for products returned to Leadshine for warranty service, 
and Leadshine shall pay for return of products to customer.   

Warranty Limitations                                                                             

Leadshine  makes  no  other  warranty,  either  expressed  or  implied,  with  respect  to  the  product. 
Leadshine  specifically  disclaims  the  implied  warranties  of  merchantability  and  fitness  for  a 
particular purpose. Some jurisdictions do not allow limitations on how long and implied warranty 
lasts, so the above limitation or exclusion may not apply to you. However, any implied warranty of 
merchantability or fitness is limited to the 12-month duration of this written warranty. 

Shipping Failed Product                                                                                                     

If your product fail during the warranty period, e-mail customer service at 

[email protected]

 to 

obtain  a  returned  material  authorization  number  (RMA)  before  returning  product  for  service. 

Please  include  a  written  description  of  the  problem  along  with  contact  name  and  address.  Send 

failed  product  to  distributor  in  your  area  or:  Leadshine  Technology  Co.,  Ltd.  Floor  3,  Block  2, 

Nanyou Tianan Industry Park, Nanshan Dist, Shenzhen, China. Also enclose information regarding 

the circumstances prior to product failure.

 

www.yusto.ru 

[email protected]

Summary of Contents for M542










Reviews: