LEADING EDGE SAFETY APR-000-12, Instruction Manual

Page: 32 / 36

T
RI
R
EX
™
I
NSTRUCTION
M
ANUAL
31
E
N
G
L
I
S
H
STEP 7
Insert the Clevis Joint Snap-In Pins (19a)
through Yoke End Linkage (19b) and
mounting points as shown. Repeat for both
ends.
APPENDIX C—ENGAGEMENT ARM INSTALLATION (CONT.)
READ AND UNDERSTAND THE ENTIRE SET OF INSTRUCTIONS BEFORE PERFORMING ANY STEP IN THIS PROCESS
19a
19b
STEP 8
Cut and remove any baling wire used to compress the shock,
allowing the
Engagement Arm Assembly (6) to
return to its upward resting position.
Rotate
Clevis Joint Snap-In Pins (19a) to snap on to
Yoke End Linkage (19b) . Repeat for both ends.
STEP 9
Position the Engagement Arm Cable (20) with the attachment
point as shown.
19a
19b
19a
19b
20
6
20