LEADING EDGE SAFETY APR-000-12, Instruction Manual

Page: 28 / 36

T
RI
R
EX
™
I
NSTRUCTION
M
ANUAL
27
E
N
G
L
I
S
H
APPENDIX B—ENGAGEMENT ARM SHOCK REMOVAL (CONT.)
READ AND UNDERSTAND THE ENTIRE SET OF INSTRUCTIONS BEFORE PERFORMING ANY STEP IN THIS PROCESS
STEP 5
Press downward slightly the Engagement Arm Assembly (6)
and hold, lift upward on the Locking Mechanism (7) handle to
disengage, release hold of the Engagement Arm Assembly
(6) . Completing this step will release any tension from the
Clevis Joint Snap-In Pins (19a) that hold the Engagement
Arm Shock (19) in place.
STEP 4
While the Engagement Arm Shock (19) is still mounted to the
machine and before removing any Clevis Joint Snap-In Pin
(19a) from the Engagement Arm Shock (19) , tightly wind
baling wire around the compressed Engagement Arm Shock
(19), two times and twist baling wire ends together 3 - 4
times.
STEP 6
WARNING—THE CLAW ASSEMBLY CAN DROP AT THIS
STEP—BE SURE TO SECURE THE CLAW FROM
DROPPING OR HAVE ANOTHER PERSON HOLD THE
CLAW FROM MOVING.
Remove the Clevis Joint Snap-In Pins (19a) from both ends
of the damaged Engagement Arm Shock (19) and remove the
Engagement Arm Shock (19).
3-4 TWISTS
19
19a
19a
19
6
7
19a
19a
19
19