2. SPECIFICATIONS
17
2.3.12
Presets
Presets(*1)
Saves the panel settings
Number of Presets
60
Preset Loading Method
Front panel, remote control connector (*2), or ethernet
Copying
All preset data can be copied from the LV 7770 to a USB
memory device or from a USB memory device to the LV
7770.
*1 Settings related to whether the instrument is on or off, the ethernet connector, the remote control
connector, the date, and the time are not saved.
*2 The number of presets loaded from the remote control connector can be 8 (6 when loudness
measurement is being controlled) or 60.
2.3.13
Main Display Features
Input
SDI (LV 5770SER08 and LV 5770SER09A) and
Composite (LV 5770SER03A)
Input Mode
Single input mode, simul mode, and 3G-SDI 2mapping
(Only single input mode is available for HD dual link
signals and composite input signals.)
Single Input Mode
Displays a single input signal
Simul Mode
Displays up to two input signals simultaneously
3G-SDI 2mapping Mode
Splits a 3G-SDI signal into two HD-SDI signals and
displays them simultaneously
Simul Mode and 3G-SDI 2 Mapping Mode Display Format
Mixed, tiled, aligned (differs depending on the displayed
contents)
Display Sizes
1-screen display, 2-screen multi display, and 4-screen
multi display
1-Screen Display
Displays a single, large screen (the thumbnail display
can be turned on and off)
2-Screen Multi Display
Splits the display into two screens (left and right)
4-Screen Multi Display
Splits the display into four screens
2.3.14
SDI Signal Video Waveform Display (LV 5770SER08 and LV 5770SER09A)
Simul Mode Display Format
Mix, aligned
Waveform Operations
Display Mode
Overlay
Overlays component signals
Parade
Displays component signals side by side
Blanking Interval
H and V blanking periods can be masked.
RGB Conversion
Converts a Y,C
B
,C
R
signal into an RGB signal and
displays the result
Channel Mapping
GBR or RGB order
Pseudo-Composite Display
Artificially converts component signals into composite
signals and displays the result
Line Select
Selected line display
Sweep Modes
H, V