Portable Plasma Torch Height Controller Manual (F1620)
7
Chapter 2 system operation
2.1 Operation panel button of explaining
Figure 2.1
panel and button explain
【▲】：
torch up button. Rising is earlier than declining.
【▼】：
torch down button.
【
MENU
】：
it is also named
as
【
MENU
】
.
Menu function button of choosing, and
different condition have different function.
【
OK
】：
it is also named
as
【
OK
】
. After entering into menu, if this button have
been pressed at the first time, the parameters are able to be modified,
After modified, the parameter will be confirmed when the button is
pressed at the second time.
【＋】：
when parameter is switching, the button can increase the parameter
number progressively. When parameter is amending, the button can increase the
parameter value.
【－】：
when parameter is switching, the button can decrease the parameter
number progressively. When parameter is amending, the button can decrease the
parameter value.
【
AUTO
】：
it is also named as
【
AUTO
】
, it is used for switching the condition which
allow auto height control. Whenever the button have pressed, the light
above the button can change condition. If the light is lighted, THC can
start auto height control during torch is working. If the light is gone out,
auto height control will stop work. The light is lighted when THC is
