Control
Parameter settings:
Press the Power button twice quickly (faster than in 0.3 second) to activate the parameter settings mode;
the parameter is flashing.
Press the Up/Down button shortly to change the value of the parameter. Press the Power button shortly to
switch to another parameter.
You can leave the parameter settings the same way.
The display will automatically quit the parameter setting mode if no button is pressed for 10 seconds.
Kilometer/Mile (S7)
Press UP/DOWN buttons to change the Km/h / MPH.
Backlight brightness (bL1)
Press UP/DOWN buttons to change the brightness 1-5.
Automatické vypnutí (OFF)
Press UP/DOWN buttons to change the automatic off time in minutes.
Wheel diameter (Wd)
Wheel diameter is set according to the manufacturer. Press UP/DOWN buttons to change the
16/18/20/22/24/26/700C/28/29.
Voltage setting (bU0)
Default voltage setting is set according to the manufacturer. Press UP/DOWN buttons to change the
24V/36V/Ube.
System is factory set. For changing these parameters contact your dealer or producer.
Do not change these parameters by yourself, you can damage the e-bike.
Damaged caused by improper treatment is not within the scope of the warranty.
Kilometer/Mi
le
Backlight
Brightness
Auto off time
Wheel
diameter
Speed limit
set
Password
Voltage set
