Assembly and disassembly
Display assembly:
Please pay attention to the tightening torque of the screws. Before assembly and during disassembly of
the display, it is necessary to remove the grip and if needed also to remove the brake lever, gear lever and
display from the handlebar. Damage caused by excessive tightening or incorrect assembly/disassembly is
not covered by the warranty.
Output Wiring Connection:
1 - Red conductor: Positive pole (24V/36V)
2 - Blue conductor: Supply cable to the controller
3 - Black conductor: GND (earthing)
4 - Green conductor: RxD (from the controller to the display)
5 - Yellow conductor: TxD (from the display to the controller)
