Leach 2R-II, Operator'S Manual

Page: 7 / 50

SAFETY PRECAUTIONS
SECTION 1
PRIOR TO START UP
1. Never operate machinery while wearing jewelry or
loose clothing. These items may become caught by
or entangled in the machinery causing serious
injury. Wear proper safety equipment as required by
your employer.
2. Never operate machinery while under the influence
of alcohol, narcotics or other mood altering sub-
stances. Workers who operate machinery while
under the influence are a hazard to themselves and
others.
3. Perform a pre-operation “walk around” inspection of
the truck chassis in accordance with the chassis
manufacturer’s guidelines. Perform a “walk around”
inspection of the refuse packer in accordance with
the checks listed in Section 3 - Operation of the
Operators/Service manual. Never start or operate
any equipment found to have malfunctions.
a. Report any malfunctions immediately to the
proper authorities.
b. Prior to leaving any malfunctioning unit the
parking brakes must be set, the PTO system
disengaged, the engine turned off, the ignition
key removed, and using a non-reusable fasten-
ing device, place a sign on the steering wheel
indicating the unit is inoperative.
4. Proper servicing requires specialized tools and pro-
cedures. Service must be performed by authorized
personnel only following procedures in the 2RII
Service manual.
5. Walk completely around the vehicle to make sure
all persons and obstructions are clear before start-
ing the unit.
6. The container handling system is a critical compo-
nent of the unit, use only the proper replacement
parts.
7. Inspect all hooks, chains and cables daily to
ensure serviceable condition. Replace damaged or
worn parts.
(See Section 5, Preventive
Maintenance)
8. Before operating the vehicle the driver must be
thoroughly familiar with the employer’s safety pro-
gram concerning traffic rules, warning devices and
hand signals.
9. Be sure to know where to get assistance in the
event of an emergency.
10. Know your machine. Know the location and func-
tion of all controls, gauges, instruments and pro-
tective devices.
11. Should the height of a refuse collection vehicle be
altered by installing a container handling system,
be sure the overall height is rechecked and overall
height plus 3 inches is noted on the decals.
1-2