2. Press the rotary knob to confirm your menu item se-
lection.
ð
The “... Dim after” menu is shown on the display
of the unit.
3. Turn the rotary knob to select one of the displayed
menu items.
4. Press the rotary knob to confirm your menu item se-
lection.
ð
The selected menu item turns green. The dim time is
now set.
NOTE!
To return to the previous display, turn the rotary
knob to select the “back” menu item and press the rotary
knob to confirm your menu item selection.
8.5.5.2 Unit Information
Fig. 26:
..Unit In-
formation
The “..Unit Information” display shows the information
on the serial number and the version numbers of the
hardware and firmware of the LPS II, as well as the ver-
sion number of the firmware of the LPS II remote display
(IBC).
To display the “...Unit Information” menu, proceed as fol-
lows:
ü
The LPS II remote display is switched on.
ü
The “.. Other Settings” menu is shown on the display
of the unit.
1. Turn the rotary knob to select the “…Unit Information”
menu item.
2. Press the rotary knob to confirm your menu item se-
lection.
ð
The “… Unit Information” menu is shown on the dis-
play of the unit. You can now read the information on
the units.
24
LEAB Automotive GmbH
Thorshammer 6
24866 Busdorf
8 Operation
LEAB Automotive GmbH
