ð
The emergency start function is activated. A charging
current of 40 A is provided for 5 minutes.
ð
Meanwhile, information on the applied voltage, the
output current and the power of the emergency start
function is displayed. After the 5 minutes, the vehicle
can be started as usual.
NOTE!
To return to the previous display, turn the rotary
knob to select the “back” menu item and press the rotary
knob to confirm your menu item selection.
8.5.3 230 V output
Fig. 17:
.230 V out-
put
The "..230 V output” menu allows you to view the oper-
ating data of the inverter (AC output).
To display the operating data of the inverter, proceed as
follows:
ü
The LPS II remote display is switched on.
ü
Status III is shown on the display of the unit.
1. Turn the rotary knob to select the "230 V output"
menu item.
2. Press the rotary knob to confirm your menu item se-
lection.
ð
“..230 V output” is shown on the display of the
unit.
3. Turn the rotary knob to select the “AC output on/off”
menu item.
4. Press the rotary knob to confirm your menu item se-
lection.
ð
The selection field next to “AC output on/off”
turns green when activated and goes out when de-
activated.
ð
The operating data of the inverter (AC output) is dis-
played.
NOTE!
To return to the previous display, turn the rotary
knob to select the “back” menu item and press the rotary
knob to confirm your menu item selection.
18
LEAB Automotive GmbH
Thorshammer 6
24866 Busdorf
8 Operation
LEAB Automotive GmbH
