9
Please always read the instruction manual carefully and check the machine before operating.
WARNING!
Ensure that the engine has oil. When leaving the factory. This machine has NO OIL in the
engine.
Check the cutting attachment, never use blades that are dull, cracked or damaged.
Make sure the handle and safety features are in good working order. Never use a machine
that lacks a part or has been modified outside its specifications.
The enclosures must be correctly fitted and undamaged before you start the machine.
WARNING!
Please always use quality gloves, foot, ear and eye protector. They should with CE mark and
tested according to PPE (Person Protective Equipment) directive.
The poor equipments may reduce the protection and result in person injure during working.
Check the engine oil
Before starting the machine, ensure the crank case is filled to the top of the neck with either
SAE30 or 10W30, 4 storke oil.
1.
before checking or refilling oil , besure the machine is put on even and stable surface.
2.
make sure the machine is switched off, by rotating the engine switch to the “off” position.
3.
remove the engine oil cap by rotating the cap anti-clockwise.
4.
If the oil level is below the top of the oil tank housing neck refill with either SAE30 (Single
viscosity) or 10W30 (Multiviscosity) 4 stroke oil.
5.
Screw in the engine oil cap.
WARNING!
The oil will be contaminated or discoloured during use. Please change the oil regularly.
For more information, please see clause: MAINTENANCE
Never use 4-stroke oil intended for water-cooled engines.
Never use oil intended for 2-stroke engines.
A poor oil quality may jeopardise function and decrease the life time of catalytic converters.
Check the engine fuel
Only fuel the machine in well-lit areas. Avoid fuel spillage. Never refuel the machine during
Summary of Contents for LE41140-40W
Page 58: ...9 www dunsch com ...
