LDR Astro 200 C, Operating Instructions Manual

Page: 13 / 18

Astro LED followspot User’s Manual – 1.0
Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy
Tel. +39 0376 771 777 – fax +39 0376 772 140 – email info@ldr.it – web www.ldr.it
12
Preloaded effects control
address
9 ‐‐‐ e.g. 9126 = DMX 126 for preloaded effects
remote control
000 ‐ 015 = effects off
016 ‐ 031 = Flashing 10 times
032 ‐ 047 = Flashing 20 times
048 ‐ 063 = Flashing 10 times
064 ‐ 079 = Flashing 20 times
080 ‐ 095 = Fade in and fade out 10 times
096 ‐ 111 = Fade in and fade out 5 times
112 ‐ 127 = Fade in and fade out 3 times
128 ‐ 255 = Fade in and fade out 2 times
001
Dimming steps CL0 ‐ CL01 = 256 steps (coarse fade)
CL02 = 512 steps (fine fade)
0
Dimming steps control address C ‐‐‐ e.g. C127 = DMX 127 for dimming steps remote
control
000 ‐ 031 = 256 steps (coarse fade)
032 ‐ 255 = 512 steps (fine fade)
001
Remote DMX reset rL0 ‐ rL00 = normal control
rL01 = reset
0
Remote DMX reset control
address
r ‐‐‐ e.g. r128 = DMX 128 for remote reset
000 ‐ 254 = normal control
255 = reset
001
LED sleep display LL0 ‐ LL01 = Display off after 30 seconds
LL02 = Display off after 45 seconds
LL03 = Display off after 60 seconds
LL04 = Continuously on (default)
4
LED sleep display control
address
L ‐‐‐ e.g. L129 = DMX 129 for LED sleep display
000 ‐ 063 = Display off after 30 seconds
064 ‐ 127 = Display off after 45 seconds
128 ‐ 191 = Display off after 60 seconds
192 ‐ 255 = Continuously on (default)
001
Maximum fan speed FL0 ‐ FL00 = 100% (maximum)
FL01 = 90% of max.
FL02 = 80% of max.
FL03 = 70% of max.
FL04 = 60% of max.
0
Maximum fan speed control
address
F ‐‐‐ e.g. L130 = DMX 130 for Max fan speed remote
control
000 ‐ 031 = 100% (maximum)
032 ‐ 063 = 90% of max.
064 ‐ 095 = 80% of max.
096 ‐ 127 = 70% of max.
128 ‐ 255 = 60% of max.
001
LED temperature t ‐‐‐ e.g. t35.6 = 35.6°C, t105 = 105°F
LED temperature alarm tER ‐ tERL = under temperature
tERH = over temperature
Dimming control value AH00
Ad00
e.g. AH37 = 37% from DMX
Ad55 = 55% from local control
Parameter status dEFA Indicates changes to settings from the default.
Press ENTER for 5 secs to reset and display U5Er