Page 3
v.06.18.20
LDPI, Inc. | (800)-854-0021 | www.ldpi-inc.com | [email protected]
INSTALLATION INSTRUCTIONS
LEHL2
General Wiring Diagram
Installation: Electrical Connection
Product Dimensions
Caution! Turn off electrical power at fuse or circuit breaker box before wiring luminaire to the power supply.
All luminaires must be individually connected to the AC power supply.
AC Input:
Black = Line
Dimming Control Wires: Gray (-)
White
=
Neutral
Purple
(0-10V
input)
Green
=
Ground
Yellow
(+10V
output)
LED Driver
Lead wires
to LED load
Terminal
Block
Black
Green
White
( - ) ( + )
1. Loosen (8) M6 hex bolts of driver housing at torque value 6 N-m.
2. Connect the housing to suitable conduit (3/4” NPT).
3. Insert outside wires through conduit and the entry hole of the housing and connect to terminal block.
4. Introduce the wires of the branch circuit as following:
Black - Connect to line
White - Connect to Neutral
Green - Connect to Ground
5. Re-attach housing cover with the (8) M6 hex bolts to the driver housing cover and torque to 6 N-m.
6. Check to ensure tightness of conduit and driver housing cover.
316mm
316mm
230mm
287mm
243mm
243mm
270mm
270mm
