LDLC Touch C1, User Manual

Page: 49 / 56

49
When the charge gets under 20%, the battery icon indicates a low-battery level. If recording
when battery reaches 0%, video will be saved before camera powers off.
To charge the battery :
Connect the camera to a power source. The red status indicator light remains on while the
battery is charging. The red status indicator will turn OFF when the battery is fully charged.
The battery will charge to 100% in 4 hours when using 500mAh USB-compatible A/C wall
charger of LDLC Touch C1 camera.
No damage will occur to the camera or the battery if used together prior to full charge. The
LDLC Touch C1 camera is equipped with two batteries of 1050mAh, in total it allows you
an autonomy of 2 hours. Extra batteries are available on our official website www.ldlc.com
To remove the battery :
1. Remove the battery door by placing your thumb in the indentation in the battery door
(on the back of the camera) and sliding it to the left.
2. Allow the door to pop out. Grasp the battery pull-tab and remove from the camera.
battery operation
RE
CH
AR
GE
AB
LE
LI-P
O
B
AT
TE
RY