LDL TECHNOLOGY COPYRIGHTS
www.aimshop.com
7
/
8
E - LF TRIGGER LEARNING PROCEDURE
FROM ON MODE
long push on Bt1 until you reach the following menu that corresponds to the learning of
sensors ID number.
To activate the learning
short push on
Bt2.
The arrows are blinking making a rotation ; the display is waiting for a RF frame. Push on FORCE FRAME button of
the LF Trigger.
As soon as the RF frame is received by the display, the two last digits of the ID are shown (you can then stop
pushing on the button).If no frame is received within 4 minutes, the display returns to FIG 11. You have to trig again
the sensor.
The ID is received. You have to validate or cancel the ID learning (in case you have trigged a sensor already
leraned).
To validate the ID learning, you have to validate first the value « y » YES (default value)
short push on Bt1
To cancel the ID learning, push shortly on Bt2 to display « n » NO. Validate « n »
short push on Bt1
Once the ID has been learned, FL (Front Left) is blinking -> You have to learn on the display the final position of the
sensor on the car.
2 last ID
digits
Choose the posiiton and validate
Choose the wheel rim set number and
validate