10
Step 6: Carefully insert the cable coming from the front of the OT-11P into the jack furtherest
from the right edge of the PC board. This is the cable that is connected to the OT-11P through the
small toroid sensor coil labeled T1 on the tuner. Insert the other cable into the jack nearest the
edge of the PC board. Double check to make sure you have the correct cable in the correct jack.
Step 7: Carefully check your work. Look especially for solder splashes or bridges. Make sure all
wires are routed neatly, and that none will be pinched or fouled when you replace the case covers.
Step 8: Replace the case covers and reconnect antenna and power cables.
Congratulations! You have completed installation of your OT-11P automatic tuner. Proceed to
Operation.
