7
Step 2.4: Locate connector J11, a white 7-pin connecter on the inside of the panel
assembly near the center. There is nothing connected to it in the stock radio. Note: Some
Orions have a blank connector here to prevent pin damage. You can remove the blank
connector to install the black and white tuner control connector.
Original Orion
Orion II
Step 2.5: Route the black and white control cable from the OT-11P tuner through the
round grommet in the back of the front-panel compartment. It's a snug fit through the
grommet, but you can gently work it through.
Step 2.6: Attach the black and white cable to J11. The connector goes on the 2
nd
and 3
rd
pins, counting from the left. Orient the connector with the wires going "down" toward the
top of the front panel (remember, the radio is upside down at this point).