23
Tune failed, Response code 10. Parameter 1: Reason 0-2. Indicates that the requested tuning
operation failed.
Parameter 1 Value: Failure Reason:
00 No RF was detected.
01 RF Carrier was lost before the tune completed.
02 The tuner was unable to bring the SWR down
below the SWR Threshold.
Version information, Response code 11. Parameter 1: Produce ID, Parameter 2: Major/Minor
version number.
Clear done, Response code 12. Indicates that the EEPROM erase operation has completed.
In standby mode, Response code 13. Indicates that the tuner has been placed in standby mode.
In active mode, Response code 14. Indicates that the tuner has restored the settings that were
saved prior to entering standby mode.
Store OK, Response code 15. Indicates that the requested store to memory operation has
completed. Note that this will be indicated whether the store operation failed or succeeded.
SWR threshold, Response code 16. Parameter 1: Threshold 0-6. Indicates the currently active
SWR threshold used for tuning.
Byte 2, SWR Threshold value
0 = 1.1:1
1 = 1.3:1
2 = 1.5:1
3 = 1.7:1
4 = 2.0:1
5 = 2.5:1
6 = 3.0:1
Auto status, Response code 17. Parameter 1: 0 or 1Report Auto Tune setting. 0 = disabled, 1 =
enabled.
Live update status, Response code 19. Parameter 1: 0 or 1. Indicates Live Update on or off. 0 =
disabled, 1 = enabled.
