7
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
DEUTSCH
ENGLISH
CONTROL
ELEMENTS:
1
MONO CHANNELS (MIC/LINE)
7KHPRQRFKDQQHOVRIIHUEDODQFHG;/5FRQQHFWRUVIRUORZLPSHGDQFH
microphones and other low-level equipment. In addition, there are 6.3
PP756MDFNLQSXWFRQQHFWRUVIRUPLFURSKRQHVDQGOLQHOHYHOHTXLSPHQW
(e.g., synthesizers, drum computers, effects processors, etc.). Synthesizer,
'UXP&RPSXWHU(IIHNWSUR]HVVRUHQHWF]XU9HUI¾JXQJ,PSRUWDQW7KH0,&
and LINE inputs cannot be used simultaneously on the same channel. +48V
3+$172032:(57KH;/5LQSXWVRQWKHPRQRFKDQQHOVSURYLGH9
phantom power for condenser microphones. Important: Never connect a
PLFURSKRQHWRDQ;/5LQSXWZKHQSKDQWRPSRZHULVRQ
2
MONO CHANNELS: INSERT
$OOPRQR0,&FKDQQHOVDUHDGGLWLRQDOO\HTXLSSHGZLWK,QVHUWVRFNHWVVWHUHR
MDFN756YLDZKLFKH[WHUQDOHIIHFWVGHYLFHVRUWKHOLNHFDQEHSDWFKHGLQWR
the respective channel. The signal is sent immediately after the input gain
FRQWURO75,0WRDQH[WHUQDOVLJQDOSURFHVVRUIRUH[DPSOHDFRPSUHVVRURU
limiter. Once the signal has passed through the external signal processor, it
LVUHWXUQHGWRWKHVDPHFKDQQHOLPPHGLDWHO\EHIRUHWKH(41RWH&RQQHF
-
ting external devices to insert points requires a so-called "Y" cable.
3
INPUT GAIN ADJUSTMENT
The input gain control has two different scales: one for microphones and one
IRUOLQHOHYHOGHYLFHV7KHRXWHUULQJaG%UHIHUVWRPLFURSKRQHVWKH
LQQHURQHaG%WROLQHOHYHOGHYLFHV$OZD\VDGMXVWWKHJDLQFRQWURO
so that the peak LED above the channel fader lights up only occasionally. If
the LED is on constantly, this can lead to distortion.
4
LOW CUT FILTER
7KH/2:&87EXWWRQDFWLYDWHVDORZFXWƂOWHU+]VORSHG%RFWDYHIRU
reducing low-frequency noise such as mains hum or handling noises from
vocal microphones.
5
STEREO CHANNELS
7KHVWHUHRFKDQQHOVDUHFRQƂJXUHGDVVWHUHRSDLUVZLWKPP756MDFN
input connectors. Mono signal sources should be connected to the left jack
input connector.
LINE IN 1
BAL OR
UNBAL
LINE
MIC
+15dB -25dB
0dB
40dB
MIC 1
INSERT
1
LINE IN 11/12
+4dBu
-10dBV
LEFT(MONO)
RIGHT
1
2
4
3
5
6
