68
Fault Relay Alarm
Power Failure:
Tick the checkbox to enable the function of lighting up the
FAULT
LED on the panel when power fails.
Port Link Down/Broken:
Tick the checkbox to enable the function of lighting up
FAULT
LED on the panel when Ports
‘ states are link down or broken.
Fault Relay Alarm interface
SNTP Configuration
You can configure the SNTP (Simple Network Time Protocol) settings. The SNTP allows
you to synchronize switch clocks in the Internet.
1.
SNTP Client:
Enable/disable SNTP function to get the time from the SNTP server.
2.
Daylight Saving Time:
Enable/disable daylight saving time function. When daylight
saving time is enabled, you need to configure the daylight saving time period.
3.
UTC Timezone:
Set the switch location time zone. The following table lists the
different location time zone for your reference.
