LCSI IES-M162C, User Manual

Page: 58 / 124

51
[password] authentication
password
1234
smtp rcptemail
[Index] [Email address]
G Configure Rcpt e-mail
Address
switch(config)# smtp rcptemail 1
Alert@test.com
show smtp P Show the information
of SMTP
switch# show smtp
no smtp G Disable SMTP
function
switch(config)# no smtp
event device-cold-start
[Systemlog|SMTP|Both]
G Set cold start event
type
switch(config)# event device-cold-
start both
event authentication-
failure
[Systemlog|SMTP|Both]
G Set Authentication
failure event type
switch(config)# event
authentication-failure both
event ring-topology-
change
[Systemlog|SMTP|Both]
G Set X-ring topology
changed event type
switch(config)# event ring-
topology-change both
event systemlog
[Link-UP|Link-
Down|Both]
I Set port event for
system log
switch(config)# interface
fastethernet 3
switch(config-if)# event systemlog
both
event smtp
[Link-UP|Link-
Down|Both]
I Set port event for
SMTP
switch(config)# interface
fastethernet 3
switch(config-if)# event smtp both
show event P Show event selection switch# show event
no event device-cold-
start
G Disable cold start
event type
switch(config)# no event device-
cold-start
no event authentication-
failure
G Disable Authentication
failure event typ
switch(config)# no event
authentication-failure
no event X-ring-
topology-change
G Disable X-ring
topology changed
event type
switch(config)# no event X-ring-
topology-change
no event systemlog I Disable port event for
system log
switch(config)# interface
fastethernet 3