LCN-GBL
Installation guide
Local Control Network
1
®
PIR motion detector and light sensor for the I-connection in glass design
The LCN-GBL is an indoor PIR motion detector with integrated light sensor in the LCN-GT
series design. Optionally a humidity sensor LCN-EFS can be inserted.
The PIR motion detector works on the passive infrared principal. The changes in human
body heat radiation are detected.
The integrated light sensor covers a very large measuring range of 5 decades
(1-100.000Lx). The measured value can be used for light dependant control or for a
constant light regulation.
Included in delivery
Connection
The LCN-GBL is suitable for connecting to the I-ports from
LCN-UPx, -SH, -SHS, -LD and -HU Serial number 120C05
(Dec. 2008) or later. The connecting cable to the LCN module
can be optionally extended up to 50 m with an LCN-IV - see
LCN-GBL, mounting plate, 2 screws (3,2x25)
& I-connecting cable.
”TDi connection from periphery” on our homepage
(
www.LCN.de / downloads
).
