6 Wyvern
®
2000N Banknote Timer Handbook
code required. Hold the UP button down until the first two digits flash. Use the UP
and DOWN buttons to select the minutes required per note. After a short period a
“beep” occurs allowing seconds required to be programmed. After approximately
10 seconds this value is stored and the first digit flashes allowing another STPN
program code to be selected. Press and hold DOWN button until the display shows
7-. Press and hold both programming buttons for approximately 5 seconds to exit
the options menu.
Currency Value Per Note (CVPN)
Program code b allows a value to be allocated to a particular note. Remember, these
options must match the note order of the note time period in option 7. The note
acceptor is factory pre-programmed so that each channel is assigned to a particular
note. When programming CVPN ensure the correct channel is allocated.
Access the options menu as described earlier and using the UP and DOWN buttons
move to option b. Hold the UP button until the first digit flashes and the display
shows b1:xx where xx is the value per note. Using the UP and DOWN buttons select
the CVPN program code required. Hold the UP button down until the first two digits
flash. Use the UP and DOWN buttons to select the value required per note. After
approximately 10 second this value is stored and the first two digits flash allowing
another CVPN program code to be selected. Press and hold DOWN button until the
display shows b-. Press and hold both programming buttons for approximately 5
seconds to exit the options menu.
Program
Code
Description
Maximum
Value
Value Used
71
Note 1 time in minutes and seconds
99m 59s
72
Note 2 time in minutes and seconds
99m 59s
73
Note 3 time in minutes and seconds
99m 59s
74
Note 4 time in minutes and seconds
99m 59s
75
Note 5 time in minutes and seconds
99m 59s
76
Note 6 time in minutes and seconds
99m 59s
77
Note 7 time in minutes and seconds
99m 59s
78
Note 8 time in minutes and seconds
99m 59s
79
Note 9 time in minutes and seconds
99m 59s