ET60 Installation and Operating Instructions
5
St.08 Maximum credit value
The ‘Maximum Credit’ feature prevents credit being accumulated above a pre-set
time limit. Entering the required time limit in setting St.08 enables this
feature. The value is entered in hours and minutes or minutes and seconds depending
on configuration of the meter. Entering zero disables this feature.
Audit functions
Audit functions allow the operator to check the meter against cash receipts taken from
the coin box.
St.03 Total Money
Displays the total amount of money/tokens inserted since the last factory reset.
This is a read only display and cannot be changed.
St.04 Total Credit
Displays the total amount of credit given since the last factory reset.
This is a read only display and cannot be changed.
Resettable Money (Token) Counter
When the coin box becomes full, the message ‘COLL’ (collect) is displayed.
Upon removal of the coin box the display will automatically show the resettable
money counter. This shows how much money has been inserted into the meter since
the last collection. When the coin box is reinserted, the money counter will
automatically zero before displaying the remaining credit.
Note: To prevent the money counter from zeroing, insert the coin box with ‘B’ pressed
To clear any Remaining Credit
To clear any remaining credit remove the coin box and the display will show the
resettable money counter as described above. Press and release Button B and the
display will show “Clr”. Simultaneously press buttons A and B and any remaining
credit will be cleared.
If the optional key over-ride is fitted then remaining credit may be cleared using the
override function (page 5)
