7.5
Symmetrically load centrifuge tubes in rotor
CAUTION
：
⚫
Make sure the rotor door is securely fixed on the rotor, rotor and spindle are
tightened. Otherwise, the rotor may be moved off while rotating and cause damage
of the centrifuge or rotor.
8. Operation
CAUTION
：
●
Do not push or lean against the centrifuge while it is running.
●
Do not run the centrifuge with fragments of tubes or dew drops left in the rotor
chamber.
●
If this centrifuge makes strange noise during its operation, stop it immediately and
contact our service center. Notify the alarm code if displayed.
8.1 Normal Operation
Turn on the POWER switch
，
The centrifuge will display the running interface last time after passing the
self-checking process. (See figure 8-1)
Figure 8-1 the last running interface
◼
Speed: 15000rpm. Running time: 12 minutes.
◼
The door lock is released.
8.1.1 Rotor loading and removal
CAUTION
：
⚫
Load the rotor on the spindle to ensure rotor is in position until it contacts with the
spindle, and tighten the screw to connect firmly the rotor with spindle, otherwise the
rotor maybe move off to damage the centrifuge.
⚫
Should be confirmed the door is firmly tightened with rotor.
150 12
min
rpm
